08-24-2003 01:10 AM - edited 03-02-2019 09:50 AM
sh in fa4/0
FastEthernet4/0 is up, line protocol is up
Hardware is cyBus FastEthernet Interface, address is 0010.54cf.2080 (bia 0010.
54cf.2080)
, Ground Floor user segment---
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 5w4d
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 10000 bits/sec, 9 packets/sec
5 minute output rate 34000 bits/sec, 9 packets/sec
25444955 packets input, 2438571694 bytes, 0 no buffer
Received 5314984 broadcasts, 0 runts, 0 giants, 0 throttles
4033 input errors, 4033 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 watchdog, 791 multicast
0 input packets with dribble condition detected
26172413 packets output, 3166263320 bytes, 0 underruns
39 output errors, 2810 collisions, 0 interface resets
0 babbles, 0 late collision, 13520 deferred
39 lost carrier, 39 no carrier
0 output buffer failures, 0 output buff
hi all,why multicast is showing 791..pls explain
08-24-2003 08:09 AM
It simply suggests you have received 791 mutlicast packets.
Thanks.
08-25-2003 12:27 PM
Depending on your routing protocol, and if this interface is an active neighbor in the routing protocol, this could explain multicast packets,
EIGRP and OSPF use multicast
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide