hi,we have 4 ethernet ports in vlan,we would like to add 3 more GBIC ports into the same vlan(for exchange server,using gbic converter)is it possible?if so pls expalinregardssaz
sh in fa4/0FastEthernet4/0 is up, line protocol is up Hardware is cyBus FastEthernet Interface, address is 0010.54cf.2080 (bia 0010.54cf.2080) , Ground Floor user segment--- MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, rely 255/255, load 1/255 E...
last week i am unable to connect to 6509 switch over telnet,then we restarted the switch.it's was ok.when we checked show spanning-tree command,one of the port 5/7 is blocking,so what i should do now?pls help us
infact we have 2 nos of 6509 and 2 no of 2926 for redundancy,in a nut shell,2926 is backbone.more over 6509 connects to 3 no of 5500 switch & 3 no of 4006 switch for vlan.
PTT IS teleco company.they did the ene to end loop test.even this mor agagin end to end test done.no errors from their side.at last we have changed the serial port to the another router.we are observing.thanks.as you said may be clocking issue.we are...