02-21-2004 08:24 PM - edited 03-02-2019 01:45 PM
I have one ata186 and one 827-4v, I can connect the voice gateway by ata186, because there is a TextBox that I can enter the username and password.
but for 827-4v, where I can enter the username/password to connect the voice gateway by SIP. VPDN? Dialer?
Thanks
02-26-2004 12:42 PM
At present SIP gateways do not support authentication, and therefore cannot respond to authentication requests for Register messages.
You can expect this feature included in coming IOS releases. Till then you can use access lists to restict access to your gateways. That is basically allowing the IP, TCP, and UDP connections from gateways that you want to allow.
02-26-2004 02:14 PM
Thanks a lot.
if SIP doesn't support Authentication, how ATA186 can connect the voice gateway by SIP and with username and password?
here is link
http://www.iconnecthere.com/nonmembers/eng/customer_care/nonmembers.asp
thanks again
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide