04-11-2002 03:28 PM - edited 03-01-2019 09:15 PM
I have an early development release of a particular 2620 router IOS which I need to upgrade but I would first like to know what feature set I currently have so I can keep that same set for the upgarded version.
Is there a way to find out via the 2620 router ?
04-11-2002 03:41 PM
Check your SHOW VER info.
You'll see something like c2600-js-mz.
The "js" part is your feature set.
Check the following link for interpretation:
http://www.cisco.com/warp/public/620/5.shtml#identifiers
Mick.
04-11-2002 04:11 PM
Thanks Mick, looked at that link but still couldn't really interpret mine from doing a SHOW VER.
All I can gather from C2600-IOS56I-M is that I have:
56i = 56 bit encryption with IPSEC
But the M part, not sure ??
Also, I thought I had the firewall feature set as well ??
My System image file is "flash:c2600-ios56i-mz_120-2_XC2.bin". Can more be revealed from that ?
Any further help much appreciated
Mark.
04-11-2002 08:04 PM
Greetings,
You can get all the details from Cisco IOS Reference Guide at the following URL:
http://www.cisco.com/warp/customer/620/1.html
Anuj
04-12-2002 03:48 AM
56i = 56 IPSEC
I=IP
O=Firewall
S=Plus
The M is to throw you off the track. :) It means that the image runs in RAM rather than Flash.
Mick.
04-12-2002 05:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide