I am trying to create some simple access rules to allow packets into a port, but whenever I activate them everything gets dropped. Can someone take a look at this and tell me what I am doing wrong.
Thanks in Advance,
Tripp
Allow IPs .100 - .139, .160 - .163
Allow IP 192.168.168.100 0.0.0.192
Allow IP 192.168.168.104 0.0.0.224
Allow IP 192.168.168.112 0.0.0.240
Allow IP 192.168.168.128 0.0.0.224
Allow IP 192.168.168.136 0.0.0.192
Allow IP 192.168.168.160 0.0.0.192
Thanks in advance again