09-18-2003 11:57 AM - edited 03-02-2019 10:26 AM
Here is the issue.
I got a Cisco 3640 that runs GRE/IPSEC vpn tunnels. It has a single T1 connected to it and runs CBAC as well for security. About every 3 days the router gets a almost fully Incomplete ARP table and dies. It has to be either have the ARP cache cleared or rebooted for it to continue working. Below is a snap shot of the ARP table when this occurs. It is plugged in a Cisco 2950 on it ethernet with no special configuration. No intervlan routing or anything like that. Does anyone have any idea why this is occuring? I checked for some BUGS articles but had no luck for the IOS I am running.
Any help would be appreaciated.
Jamie
Internet 10.7.216.113 0 Incomplete ARPA
Internet 10.7.217.113 0 Incomplete ARPA
Internet 10.7.216.112 0 Incomplete ARPA
Internet 10.7.216.115 1 00d0.b744.ca70 ARPA FastEthernet0/0
Internet 10.7.217.114 0 Incomplete ARPA
Internet 10.7.217.115 0 Incomplete ARPA
Internet 10.7.216.114 0 Incomplete ARPA
Internet 10.7.217.124 0 Incomplete ARPA
Internet 10.7.216.125 0 Incomplete ARPA
Internet 10.7.217.125 0 Incomplete ARPA
Internet 10.7.216.124 0 Incomplete ARPA
Internet 10.7.217.126 0 Incomplete ARPA
Internet 10.7.216.127 0 Incomplete ARPA
Internet 10.7.217.127 3 0008.020c.b077 ARPA FastEthernet0/0
Internet 10.7.216.126 0 Incomplete ARPA
Internet 10.7.217.120 0 Incomplete ARPA
Internet 10.7.216.121 0 Incomplete ARPA
Internet 10.7.216.120 0 0009.6b90.16ad ARPA FastEthernet0/0
Internet 10.7.217.121 1 0090.27c1.8756 ARPA FastEthernet0/0
Internet 10.7.217.122 0 Incomplete ARPA
Internet 10.7.216.123 0 Incomplete ARPA
Internet 10.7.216.122 0 0002.a5af.48e2 ARPA FastEthernet0/0
Internet 10.7.217.123 0 Incomplete ARPA
Internet 10.7.217.100 0 Incomplete ARPA
Internet 10.7.216.101 0 Incomplete ARPA
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.7.217.101 0 Incomplete ARPA
Internet 10.7.216.100 0 Incomplete ARPA
Internet 10.7.217.102 0 Incomplete ARPA
Internet 10.7.216.103 0 Incomplete ARPA
Internet 10.7.217.103 0 Incomplete ARPA
Internet 10.7.216.102 0 Incomplete ARPA
Internet 10.7.217.96 0 Incomplete ARPA
Internet 10.7.216.97 0 Incomplete ARPA
Internet 10.7.217.97 0 Incomplete ARPA
Internet 10.7.216.96 0 Incomplete ARPA
Internet 10.7.217.98 0 Incomplete ARPA
Internet 10.7.216.99 0 Incomplete ARPA
Internet 10.7.217.99 0 Incomplete ARPA
09-24-2003 10:38 AM
Not sure if you are using multiple HSRP groups. In case you do, you can try clearing the arp table "clear arp" and try "sh arp".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide