05-19-2003 06:54 AM - edited 03-02-2019 07:27 AM
Hi,
I have a 7206 connected to a 2950 with GE (fiber) and a second fiber connected to a 3500XL. Both links used to be connected to the 3500XL and configured as ISL trunks. Since 2950 only supports 802.1Q, I had to change the config.
But I also configured Bridging on the ISL trunk. With the change I found out that I could not configure Bridging on the 802.1Q int. I tried a newer software version (12.2-14S1) with should support this. But that was not the case. Does anyone know if this config is possible (with another IOS?)?
I do need the bridging feature:-(
Regards,
Raymond
05-19-2003 07:27 AM
You'll need the T train.
05-20-2003 12:18 AM
Thanks, will try that.
Raymond
05-20-2003 11:59 PM
Thanks, that worked.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide