06-08-2004 12:40 AM - editado 03-02-2019 04:13 PM
We did not configure the spanning tree or trunking functions of our C2950-24 switches in the network. Currently we are facing intermittent network timeout issues, e.g. in printing and intranet access. Is this the possible result of not doing this configuration on the switches? How do we determine the root cause?
el 06-08-2004 04:51 AM
Spanning tree is enabled by default and you do not have to trunk unless you want to pass multiple VLANs. Can you post your configuration? If you have hosts(workstations, printers, servers) directly connected to switchports, make sure you have "switchport host" enabled under the interfaces
el 06-09-2004 09:29 PM
If a server is connected to the switch port and "switchport host" is not enabled, then what is the result or problem we will face with this connection?
Descubra y salve sus notas favoritas. Vuelva a encontrar las respuestas de los expertos, guías paso a paso, temas recientes y mucho más.
¿Es nuevo por aquí? Empiece con estos tips. Cómo usar la comunidad Guía para nuevos miembros