I wish to setup a 2600 or 3600 single E1 V35 Frame-relay connection with 4M bandwidth. Understanding that E1 will support 2M, then this would appear not possible, however I know it can work on 7000s with multiple T1s configured, so long as the module B/w capacity is not exceeded. If I had a 2 or 4 port E1 module, would it work?
Yes, this should be fine. For example, the NM-4T module provides a synchronous data rate of 8 MB/sec on port 0, 4 MB/sec each on port 0 and port 2, or 2 MB on all four ports simultaneously.
Yes, this should be fine. For example, the NM-4T module provides a synchronous data rate of 8 MB/sec on port 0, 4 MB/sec each on port 0 and port 2, or 2 MB on all four ports simultaneously.
