cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
306
Views
0
Helpful
1
Replies

can I connect a catalyst 1900 switch to 10base t hub

admin_2
Level 3
Level 3

can I connect a catalyst 1900 switch to 10base t hub?

1 Reply 1

Not applicable

The ports on c1900 are auto sensing 10/100,

so they would automatically map to the supported

speed and duplex of the connected device.

The options to watch are.

If using a hub with uplink port, use a straight

cable from the hub's uplink to switch port

and press the MDX button on the hub to cross

the cable at the hub side.

(2) If you using normal port between the hub

and the c1900 switch port, then you'll have to

use a cross cable for connection between them.