I have a problem with a PIX 501 Ver 6.3(3) and stopping icmp. I have added the following commands, but I can still ping my firewall's outside interface. Any ideas?
firewall# sh access-list
access-list cached ACL log flows: total 0, denied 0 (deny-flow-max 256)
alert-interval 300
access-list acl-in; 15 elements
access-list acl-in line 1 deny icmp any any (hitcnt=39227)
access-list acl-in line 2 deny icmp any any echo-reply (hitcnt=0)
access-list acl-in line 3 deny icmp any any unreachable (hitcnt=0)
access-list acl-in line 4 deny icmp any any time-exceeded (hitcnt=0)
access-list acl-in line 5 deny icmp any any source-quench (hitcnt=0)
access-list acl-in line 6 deny udp any any eq tftp (hitcnt=0)
access-list acl-in line 7 deny udp any any eq 135 (hitcnt=0)
access-list acl-in line 8 deny tcp any any eq 135 (hitcnt=0)
access-list acl-in line 9 deny tcp any any eq netbios-ssn (hitcnt=0)
access-list acl-in line 10 deny udp any any eq netbios-ns (hitcnt=0)
access-list acl-in line 11 deny udp any any eq netbios-dgm (hitcnt=0)
access-list acl-in line 12 deny tcp any any eq 445 (hitcnt=0)
access-list acl-in line 13 deny tcp any any eq 593 (hitcnt=0)
access-list acl-in line 14 permit udp any any eq 22 (hitcnt=0)
access-list acl-in line 15 deny ip any any (hitcnt=11652)
firewall# sh access-group
access-group acl-in in interface outside
firewall#
Thanks