10-16-2002 10:32 PM - edited 03-02-2019 02:08 AM
Hi all,
the SYSTEM Led on the Supervisory Board lights yellow.
The sh env responses with
%C6KENV-SP-4-CLOCKFAILED: clock 2 failed
What does it mean and how can I fix this Problem?
The Error Message Interpreter does not have any response to that Error Message.
10-17-2002 02:15 AM
The cat 6500 has two system clocks on the backplane. These are necessary to time the forwarding of packets. You must have one working clock for packets to be forwarded. You can see which has failed by using the show test command, this will show which clock is being used and the result of any tests.
I suggest you speak to your hardware maintenance company regarding replacement.
10-17-2002 06:13 AM
The clock module might have failed
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/msgguide/emsg.htm#xtocid7
Here is how you would replace it
http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_10498.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide