12-17-2003 03:26 PM - edited 03-02-2019 12:25 PM
The documentation is somewhat vague about using Netflow on the Cat6k platform. I have configured it appropriately as follows:
mls flow ip full
mls nde interface
mls nde sender version 7
interface g1/1
description ROUTED INTERFACE
ip route-cache flow
Now, I can *see* the flow info with "show mls netflow ip":
DstIP SrcIP Prot:SrcPort:DstPort Src i/f:AdjPtr
--------------------------------------------------------------------
Pkts Bytes Age LastSeen Attributes
---------------------------------------------------
112.123.166.6 33.33.69.20 tcp :22211 :www 0 : 0
6 387 289 16:16:44 L3 - Dynamic
However, when I execute a "show ip cache flow," I don't see any of these flows.
I'd like to gain the stats from "show ip cache flow" at the CLI, but can't seem to figure out how. Please help!
12-23-2003 09:08 AM
I could not figure out what exactly is the problem but I found this document to be very useful on the NDE on cat6k.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/12_1e/swconfig/nde.htm#41001
12-24-2003 12:10 PM
Yes, that's the same doc I was working from. It doesn't give any indication as to what you should expect to see with show commands, though. For example, "show ip cache flow" on a normal router gives the info I need. This doesn't seem to work on a 6500. I don't know if it's working or not.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide