Cat6k5 doen´t show the inserted module in the configuration

[maerjak]

Hi!

When I type "sh conf" on a Cat6k5 (BBS2) I didn't get the config for module 7.

It always shows "#module 7 empty" but the modul in slot 7 is instered and working well. If I type "sh conf all", I get the whole config of module 7. Everyithing is working well, but it irritates me.

Have have some an idea?

Regards,

Manfred

BBS2> (enable) sh module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 16 1000BaseX Ethernet WS-X6416-GBIC no ok

3 3 16 1000BaseX Ethernet WS-X6416-GBIC no ok

4 4 16 1000BaseX Ethernet WS-X6416-GBIC no ok

5 5 16 1000BaseX Ethernet WS-X6416-GBIC no ok

7 7 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

8 8 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

9 9 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

Mod Module-Name Serial-Num

--- ------------------- -----------

1 SADxxxxxxxx

15 SADxxxxxxxx

2 SADxxxxxxxx

3 SADxxxxxxxx

4 SADxxxxxxxx

5 SADxxxxxxxx

7 SADxxxxxxxx

8 SADxxxxxxxx

9 SADxxxxxxxx

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-02-fc-bc-32-4e to 00-02-fc-bc-32-4f 7.0 5.3(1) 5.5(8)

00-02-fc-bc-32-4c to 00-02-fc-bc-32-4d

00-d0-01-56-c0-00 to 00-d0-01-56-c3-ff

15 00-04-c1-9b-86-00 to 00-04-c1-9b-86-3f 1.1 12.1(7)E 12.1(7)E

2 00-b0-c2-f3-cb-74 to 00-b0-c2-f3-cb-83 1.1 5.3(1) 5.5(8)

3 00-05-9a-8f-70-00 to 00-05-9a-8f-70-0f 1.0 5.4(2) 5.5(8)

4 00-03-32-83-26-c0 to 00-03-32-83-26-cf 1.2 5.4(2) 5.5(8)

5 00-0b-5f-3f-a3-30 to 00-0b-5f-3f-a3-3f 2.3 5.4(2) 5.5(8)

7 00-30-b6-38-67-1c to 00-30-b6-38-67-4b 1.1 5.3(1) 5.5(8)

8 00-04-de-86-0a-50 to 00-04-de-86-0a-7f 2.0 5.4(2) 5.5(8)

9 00-30-b6-38-6e-3c to 00-30-b6-38-6e-6b 1.1 5.3(1) 5.5(8)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine WS-F6K-PFC SAD05010GJG 1.1

BBS2> (enable)

[Prashanth Krishnappa]

Can you paste the output of "sh config 7 all"

[maerjak]

begin

!

# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****

!

#module 7 : 48-port 10/100BaseTX Ethernet

set module name 7

set module enable 7

set vlan 1 7/22,7/41-44

set vlan 2 7/4-6

set vlan 3 7/13-14,7/17,7/24-25,7/47

set vlan 4 7/29-30

set vlan 7 7/3,7/38,7/40

set vlan 15 7/23,7/26-28,7/31-36,7/39

set vlan 32 7/46

set vlan 50 7/18-21,7/48

set vlan 70 7/7-8,7/16,7/37

set vlan 71 7/2,7/11,7/15

set vlan 73 7/9-10,7/12

set vlan 99 7/1

set vlan 150 7/45

set port auxiliaryvlan 7/1-48 none

set port qos 7/1-48 trust-ext untrusted

set port qos 7/1-48 cos-ext 0

set port enable 7/1-48

set port speed 7/6,7/8-10,7/12,7/14,7/16-19,7/22,7/24-25,7/29-32,7/38-48 auto

set port speed 7/11,7/13,7/21,7/37 10

set port speed 7/1-5,7/7,7/15,7/20,7/23,7/26-28,7/33-36 100

set port duplex 7/1-5,7/7,7/15,7/20,7/23,7/26-28,7/33-36 full

set port duplex 7/11,7/13,7/21,7/37 half

set port trap 7/1-48 disable

set port name 7/1 ATM Backbone

set port name 7/2 RO26 EUnet Internet

set port name 7/3 OPA6

set port name 7/4 RO08

set port name 7/5 RO21

set port name 7/6 RO11 Richtfunk

set port name 7/7 RO22

set port name 7/9 CSC-Router

set port name 7/10 ASCEND

set port name 7/11 RO09 AT&T Internet

set port name 7/12 RO12 Wiltron

set port name 7/13 RO16 2210 Dial-in

set port name 7/14 RO23 3640 Dial-in

set port name 7/15 TELEK. INTERN.-ROUT.

set port name 7/16 RO13 FR Hongkong/UK

set port name 7/17 RSX20

set port name 7/18 RSX39 RSC

set port name 7/19 STGAOMA RSC

set port name 7/20 ARCHSERV ERI0

set port name 7/21 ARCHSERV RSC

set port name 7/23 RSX03 Clone

set port name 7/24 ST15 SanSwitch 2109

set port name 7/25 ST14 SanSwitch 2109

set port name 7/26 CITRIX01

set port name 7/27 CITRIX02

set port name 7/28 Manu Rep (temp)

set port name 7/29 ATSZGFS03

set port name 7/30 ATSFZGS03 FE

set port name 7/31 ATANPDC1 DomainCtl

set port name 7/33 X74 Manug

set port name 7/34 X75 Manug

set port name 7/35 ATANCX04

set port name 7/36 ATANCX05

set port name 7/37 RO31 ATT-Eurowan

set port name 7/38 ACD MANAGER

set port name 7/39 HYPARCHIV

set port name 7/40 LE94 - SUN

set port name 7/45 Maintenance Port

set port name 7/46 F581 -DHCP-Server

set port name 7/47 ST18_SAN_Switch

set port name 7/48 APSAOMA RSX71 RSC

set port name 7/8,7/22,7/32,7/41-44

set port security 7/1-48 disable age 0 maximum 1 shutdown 0 violation shutdown

set port broadcast 7/1-48 100.00%

set port membership 7/1-48 static

set port protocol 7/1-48 ip on

set port protocol 7/1-48 ipx auto

set port protocol 7/1-48 group auto

set port flowcontrol 7/1-48 send off

set port flowcontrol 7/1-48 receive off

set cdp enable 7/1-48

set udld disable 7/1-48

set udld aggressive-mode disable 7/1-48

set trunk 7/1 auto negotiate 1-1005

set trunk 7/2 auto negotiate 1-1005

set trunk 7/3 auto negotiate 1-1005

set trunk 7/4 auto negotiate 1-1005

set trunk 7/5 auto negotiate 1-1005

set trunk 7/6 auto negotiate 1-1005

set trunk 7/7 auto negotiate 1-1005

set trunk 7/8 auto negotiate 1-1005

set trunk 7/9 auto negotiate 1-1005

set trunk 7/10 auto negotiate 1-1005

set trunk 7/11 auto negotiate 1-1005

set trunk 7/12 auto negotiate 1-1005

set trunk 7/13 auto negotiate 1-1005

set trunk 7/14 auto negotiate 1-1005

set trunk 7/15 auto negotiate 1-1005

set trunk 7/16 auto negotiate 1-1005

set trunk 7/17 auto negotiate 1-1005

set trunk 7/18 auto negotiate 1-1005

set trunk 7/19 auto negotiate 1-1005

set trunk 7/20 auto negotiate 1-1005

set trunk 7/21 auto negotiate 1-1005

set trunk 7/22 auto negotiate 1-1005

set trunk 7/23 auto negotiate 1-1005

set trunk 7/24 auto negotiate 1-1005

set trunk 7/25 auto negotiate 1-1005

set trunk 7/26 auto negotiate 1-1005

set trunk 7/27 auto negotiate 1-1005

set trunk 7/28 auto negotiate 1-1005

set trunk 7/29 auto negotiate 1-1005

set trunk 7/30 auto negotiate 1-1005

set trunk 7/31 auto negotiate 1-1005

set trunk 7/32 auto negotiate 1-1005

set trunk 7/33 auto negotiate 1-1005

set trunk 7/34 auto negotiate 1-1005

set trunk 7/35 auto negotiate 1-1005

set trunk 7/36 auto negotiate 1-1005

set trunk 7/37 auto negotiate 1-1005

set trunk 7/38 auto negotiate 1-1005

set trunk 7/39 auto negotiate 1-1005

set trunk 7/40 auto negotiate 1-1005

set trunk 7/41 auto negotiate 1-1005

set trunk 7/42 auto negotiate 1-1005

set trunk 7/43 auto negotiate 1-1005

set trunk 7/44 auto negotiate 1-1005

set trunk 7/45 auto negotiate 1-1005

set trunk 7/46 auto negotiate 1-1005

set trunk 7/47 auto negotiate 1-1005

set trunk 7/48 auto negotiate 1-1005

set spantree portfast 7/20 enable

set spantree portfast 7/1-19,7/21-48 disable

set spantree portcost 7/1-5,7/7,7/15,7/17,7/20,7/23-29,7/31-36,7/38-39,7/46 19

set spantree portcost 7/6,7/8-14,7/16,7/18-19,7/21-22,7/30,7/37,7/40-45,7/47-48 100

set spantree portpri 7/1-48 32

set spantree portvlanpri 7/1 0

set spantree portvlanpri 7/2 0

set spantree portvlanpri 7/3 0

set spantree portvlanpri 7/4 0

set spantree portvlanpri 7/5 0

set spantree portvlanpri 7/6 0

set spantree portvlanpri 7/7 0

set spantree portvlanpri 7/8 0

set spantree portvlanpri 7/9 0

set spantree portvlanpri 7/10 0

set spantree portvlanpri 7/11 0

set spantree portvlanpri 7/12 0

set spantree portvlanpri 7/13 0

set spantree portvlanpri 7/14 0

set spantree portvlanpri 7/15 0

set spantree portvlanpri 7/16 0

set spantree portvlanpri 7/17 0

set spantree portvlanpri 7/18 0

set spantree portvlanpri 7/19 0

set spantree portvlanpri 7/20 0

set spantree portvlanpri 7/21 0

set spantree portvlanpri 7/22 0

set spantree portvlanpri 7/23 0

set spantree portvlanpri 7/24 0

set spantree portvlanpri 7/25 0

set spantree portvlanpri 7/26 0

set spantree portvlanpri 7/27 0

set spantree portvlanpri 7/28 0

set spantree portvlanpri 7/29 0

set spantree portvlanpri 7/30 0

set spantree portvlanpri 7/31 0

set spantree portvlanpri 7/32 0

set spantree portvlanpri 7/33 0

set spantree portvlanpri 7/34 0

set spantree portvlanpri 7/35 0

set spantree portvlanpri 7/36 0

set spantree portvlanpri 7/37 0

set spantree portvlanpri 7/38 0

set spantree portvlanpri 7/39 0

set spantree portvlanpri 7/40 0

set spantree portvlanpri 7/41 0

set spantree portvlanpri 7/42 0

set spantree portvlanpri 7/43 0

set spantree portvlanpri 7/44 0

set spantree portvlanpri 7/45 0

set spantree portvlanpri 7/46 0

set spantree portvlanpri 7/47 0

set spantree portvlanpri 7/48 0

set spantree portvlancost 7/1 cost 18

set spantree portvlancost 7/2 cost 18

set spantree portvlancost 7/3 cost 18

set spantree portvlancost 7/4 cost 18

set spantree portvlancost 7/5 cost 18

set spantree portvlancost 7/6 cost 99

set spantree portvlancost 7/7 cost 18

set spantree portvlancost 7/8 cost 99

set spantree portvlancost 7/9 cost 99

set spantree portvlancost 7/10 cost 99

set spantree portvlancost 7/11 cost 99

set spantree portvlancost 7/12 cost 99

set spantree portvlancost 7/13 cost 99

set spantree portvlancost 7/14 cost 99

set spantree portvlancost 7/15 cost 18

set spantree portvlancost 7/16 cost 99

set spantree portvlancost 7/17 cost 18

set spantree portvlancost 7/18 cost 99

set spantree portvlancost 7/19 cost 99

set spantree portvlancost 7/20 cost 18

set spantree portvlancost 7/21 cost 99

set spantree portvlancost 7/22 cost 99

set spantree portvlancost 7/23 cost 18

set spantree portvlancost 7/24 cost 18

set spantree portvlancost 7/25 cost 18

set spantree portvlancost 7/26 cost 18

set spantree portvlancost 7/27 cost 18

set spantree portvlancost 7/28 cost 18

set spantree portvlancost 7/29 cost 18

set spantree portvlancost 7/30 cost 99

set spantree portvlancost 7/31 cost 18

set spantree portvlancost 7/32 cost 18

set spantree portvlancost 7/33 cost 18

set spantree portvlancost 7/34 cost 18

set spantree portvlancost 7/35 cost 18

set spantree portvlancost 7/36 cost 18

set spantree portvlancost 7/37 cost 99

set spantree portvlancost 7/38 cost 18

set spantree portvlancost 7/39 cost 18

set spantree portvlancost 7/40 cost 99

set spantree portvlancost 7/41 cost 99

set spantree portvlancost 7/42 cost 99

set spantree portvlancost 7/43 cost 99

set spantree portvlancost 7/44 cost 99

set spantree portvlancost 7/45 cost 99

set spantree portvlancost 7/46 cost 18

set spantree portvlancost 7/47 cost 99

set spantree portvlancost 7/48 cost 99

set port qos 7/1-48 cos 0

set port qos 7/1-48 trust untrusted

set port qos 7/1-48 port-based

set port qos 7/1-48 policy-source cops

set port rsvp 7/1-48 dsbm-election disable 128

set port gvrp 7/1-48 disable

set gvrp registration normal 7/1-48

set gvrp applicant normal 7/1-48

set port gmrp 7/1-48 enable

set gmrp registration normal 7/1-48

set gmrp fwdall disable 7/1-48

set port channel 7/1-48 mode auto silent

!

[scottmac]

I believe this occurs when the system image doesn't support the module. Check your version against the supported hardware list for that version.

FWIW

Scott