04-28-2006 03:29 AM - edited 03-03-2019 03:00 AM
Hi,
Would appreciate if anyone can advise if catalyst 2924M and catalyst 5500 supports bpdu guard? If yes, what is the IOS/CatOs version to be upgraded to?
Thanks.
Christina
04-28-2006 06:49 AM
Hi Christina,
The 5500 does support bpdu guard. I'm not certain exactly which version first supports it, but it is supported in 6.x code.
Documented here:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_6_3/config/stp_enha.htm#1019943
You could check the documentation for whatever code you are running to see if the feature is documented. If it's not there, then it's not supported in that code.
HTH,
Bobby
*Please rate helpful posts.
04-28-2006 06:57 AM
Hi Christina,
Forgot about the 2924M, It also supports BPDU guard. See:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/scg/swsyst.htm#xtocid71
From what I can tell, it's first supported in 12.0(5)WC3.
HTH,
Bobby
*Please rate helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide