Cisco 4948 -- Link up Link down traps - Missing Trap Components
Hi Guys ,
While simulating traps via making a link down and again up , Cisco 4948 is sending the OID 1.3.6.1.6.3.1.1.5.3 to our monitoring device .
But it seems below variables /trap components are missing with the OID , does anyone have any hints about this ?
ifIndex
ifAdminStatus
ifOperStatus
My SNMP configuration is like
snmp-server community public RO
snmp-server community private RW
snmp-server trap link switchover
snmp-server trap-source Vlan102
snmp-server location NY
snmp-server contact XYZ
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps tty
snmp-server enable traps cpu threshold
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps config
snmp-server host x.x.x.x version 2c public
Thanks & Regards
Rengith Kumar RS