CISCO 828 Back to Back

[helenio]

Can I connect two 828 (or CISCO 1700 routers with G.HDSL WIC card) back to back.

One of the two 828 should be a kind of master, is the 828 able to do that ?

The G.HDSL interface is a king of ATM interface, should the 828 be connected only to a DSLAM or can be directly connected to another CISCO router with G.HDSL interface ?

[fmeetz]

You can connect G.HDSL interface back to back or with another DSLAM, for further details go through this URL

http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a008008871a.html

[helenio]

I'm testing two C828 connected back to back in bridging configuration mode.

I configured the C828s as described in document below (one CPE and other CO). The problem is that I'm not able to telnet to the remote C828.

Somebody know why if the two router are configured as brigdes they can not by reachead by IP (telnet otr ping) ?

http://www.cisco.com/en/US/partner/products/hw/routers/ps380/products_configuration_example09186a0080094118.shtml

[helenio]

addinng the IP and MAC address on the ATM Interface the ping and telnet work ...