06-28-2004 04:11 AM - edited 03-02-2019 04:40 PM
hi ho :)
i need a simple config to get access to the internet with a Cisco 831!
Scenario:
--[CABLEMODEM]--eth1--[<- wansideCISCO831lanside->]--eth0--
eth1 get the IP from the ISP (DHCP)
eth0 get 192.168.1.1 255.255.255.0
I have no idea and the knowhow to manage this! :(
thx for help
richard
06-28-2004 04:22 AM
Hello,
this is what your configuration should look like (no warranty, though..:)
hostname 831
!
ip subnet-zero
no ip domain-lookup
!
vpdn enable
no vpdn logging
!
vpdn-group 1
request-dialin
protocol pppoe
!
!
!
!
interface Ethernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
no ip mroute-cache
!
!
!
!
interface Ethernet0/1
no ip address
pppoe enable
pppoe-client dial-pool-number 1
!
interface Dialer1
ip address negotiated
ip nat outside
ip mtu 1492
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
ppp authentication pap
--> ppp pap sent-username cisco password cisco (this should be the username and password given to you by your provider)
!
ip classless
no ip http server
!
dialer-list 1 protocol ip permit
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 dialer1
access-list 1 permit 192.168.1.0 0.0.0.255
!
line con 0
exec-timeout 0 0
transport input none
line vty 0 4
login
password cisco
!
end
Regards,
GP
06-28-2004 05:03 AM
the next question is: what image should i use for ipsec config?
the current image on the C381 is: c831-k9o3y6-mz.123-2.XC2.bin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide