cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1365
Views
5
Helpful
18
Replies

Cisco 837 Problem

rmujeeb81
Level 1
Level 1

I have a Cisco 837 Router. The problem I am facing is that its cookie information is corrupted.

System Bootstrap, Version 12.2(11r)YV3, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 2004 by cisco Systems, Inc.

WARNING: Cookie information is corrupt

C800/SOHO series (Board ID: 23-0) platform with 65536 Kbytes of main memory

rommon 1 > cookie

WARNING: Cookie information is corrupt

cookie:

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Kindly tell me how to enter cookie values to boot properly.

Regards,

Mujeeb

18 Replies 18

How is the webpage coming along that will explain how to do this?

I have a 1711 with a corrupt cookie.

Dear NetPros

I have published a first (pre-) release of the page at http://www.bitshift.ch/eng/support/kbase/net.asp

Although it is not yet finished, it may give you enough information to solve your individual problems with cookie corruption.

Please check back soon, since I am still working on this article, and a new revision will be published every few days. I will add all my knowledge about cookies, of course also concerning other platforms like 1700.

Few details about the cookies are still totally unknown. Since Cisco officially doesn't answer any questions regarding those cookies, I depend on you NetPros, and the internet community in general. If you have additional knowledge, even small details, please let me know. My e-mail is on the home page.

Most useful are cookies of working routers. If you want to contribute, send me cookies along with detailed descriptions of the respective routers - maybe a show tech would be best. I will then analyze those cookies and maybe find out even more. (I will not publish any cookies without changing the processor board id and MAC address first.)

BTW: My newly created kbase also includes a tool to find out the priv rommon mode password.

Hope this helps.

Patrick

Dear Anthony,

Password which you gave is working and I have changed cookie values. After that router is booting properly. I found right cookie values from another Cisco 837 Router.

Thanks a lot for your support.

Regards,

Mujeeb

Dear Anthony,

I have another issue with Cisco 837 which I have posted at WAN,Routing and Switching Forum.

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=WAN%2C%20Routing%20and%20Switching&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddafd74

I hope you can also guide me on this issue.

Regards,

Mujeeb

Review Cisco Networking for a $25 gift card