03-18-2020 10:53 PM
I need 9200 L2 and 9300 L3 series switches all with 10Gbps uplink ports as shown in the diagram.
Please let me know if its possible as per the attached diagram,all uplinks from 9200 to 9300 L3 switch should be 10Gbps.
Also let me know the maximum possible 10G ports on 9300 core switches.
Solved! Go to Solution.
03-20-2020 03:40 PM
03-18-2020 11:14 PM
03-19-2020 04:38 AM
Any limitations with this design?
I am using 2 x 10G up links from each L2 switch to L3 Stack using LACP.
03-19-2020 02:43 PM
03-20-2020 09:43 AM
3 stacks each with 2 switches as shown in the diagram. Also firewall in HA pair.
03-20-2020 03:40 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide