Clear static mac address from 3750 12.2(35)SE2

[bws]

hi all,

can anyone let me know how can i clear static mac address entries from my switch stack. These address have come of from dot1x configured ports and now their is no pc connected to port. I tried setting interface to default still the old addressess are binded to it. How can i clear static mac address entries from the table?

[lgijssel]

Please check the link below and read the section about sticky mac adresses:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/port_sec.html#wp1057168

regards,

Leo

[bws]

hi,

the addresses in my table are not configured. They appear bcoz i've configured dot1x on the interface and after pc authenticates they are shown as static. I tried all the options but unable to clear them so far. :(

[lgijssel]

In that case: clear dot1x

To clear 802.1X interface information, use the clear dot1x command in privileged EXEC mode.

clear dot1x {all | interface interface-name}

http://www.cisco.com/en/US/products/ps6922/products_command_reference_chapter09186a008069c0fe.html#wp1010369

Leo