Clock time issue in c3560 Logs:

[izharulhaque]

Hi my name Izhar,
I am facing the issue with C3560 switch.
i have set the clock which is showing correctly but in Logging it's getting the incorrect time.
please any one help.

acc-ingles-up-00#sh clock
10:08:36.366 UTC Thu Jul 5 2012

below the logs :

1y8w: %LINK-3-UPDOWN: Interface FastEthernet0/12, changed state to down
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up
1y8w: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down

[Leo Laohoo]

Try this:

conf t

serv time d d s l

serv time l d s l

clock timezone WORD

clock summer-time WORD DST_SETTINGS

end

[izharulhaque]

Hi Leolaohoo,

thanks for your support, have configured as you told but still it's not resolved.

acc-ingles-up-00(config)#service timestamps debug datetime show-timezone local timestamp

1y8w: %SYS-5-CONFIG_I: Configured from console by mhaque on vty0 (172.xx.xx.xx)

[Leo Laohoo]

serv time l d s l

You forgot this line.

[izharulhaque]

Thanks for your help...

the issue get resolved....

I had tried the command but after that the issue was not resolved.

I have used the below command to fix it:

switch(config)#service timestamps log datetime

[Leo Laohoo · Accepted solution]

Can you please mark this thread as "Answered"?

[Leo Laohoo]

I had tried the command but after that the issue was not resolved.
I have used the below command to fix it:
switch(config)#service timestamps log datetime

The command I recommend you use last "serv time l d s l" is the "shortcut" of this command you're using.

Thanks for the ratings. 

[izharulhaque]

Thanks again.......