CONFIGURE WCCP

[vwhk]

Dear All,

How can I configure WCCP version 1 or 2 works on my LAN? I use Cisco 2600 with version 12.1(5)T8.

Setting of Cisco:

ip wccp version 1

ip wccp web-cache

ip wccp web-cache redirect out

Show IP WCCP web-cache detail:

WCCP Cache-Engine information:

IP Address: 192.168.15.7

Protocol Version: 0.4

State: Usable

Initial Hash Info: 00000000000000000000000000000000

00000000000000000000000000000000

Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Hash Allotment: 256 (100.00%)

Packets Redirected: 8

Connect Time: 01:00:35

Cache Engine use Squid 2.4stable 1:

wccp_version 4

The packets redirect to Cache Engine is very slow (you can see there only redirect 8 packets) when I am surfing internet and Internet browser finally is time out.

So can someone advise me what is missing or problems?

[ciscomoderator]

Often times complex configuration issues are best addressed in an interactive session with one of our trained technical assistance engineers. While other forum users may be able to help, it’s often difficult to do so for this type of issue.

To utilize the resources at our Technical Assistance Center, please visit http://www.cisco.com/tac and to open a case with one of our TAC engineers, visit http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.