Dear,
I have a home lab wthe a 2600 access server (16 port octal).
From this 2600 router I want to connect to a Raritan 8 ports RPC.
This RPC (Remote power control) has a rs232 serial port (RJ45)
I tried a lot and still I do not get connected to the RPC, has anyone ever done this before.
When I use a rs232 serial cable from the RPC to my serial pc port, I get into the rpc directly when putty is opened.
pinout RPC
| Pinout Aux (cisco)
| Pinout rs-232 (db9)
|
|---|
| 1 DTR | 1 RTS | 1 DCD |
| 2 GND | 2 DTR | 2 RX |
| 3 RTS | 3 TX | 3 TX |
| 4 TX | 4 GND | 4 DTR |
| 5 RX | 5 GND | 5 GND |
| 6 - | 6 RX | 6 DSR |
| 7 GND | 7 DSR | 7 RTS |
| 8 DCD | 8 CTS | 8 CTS |
|
| 9 RI (ring indicator) |
I created several cables without succes.
I connected RTS to CTS and DTR to DSR.
On aux port I used the following.
speed 9600 8n1
transport all
modem inout
(also tried with modem printer)
I'm missing something to get is working.
Any help?
Kind regards,
Remko
