copy all config OLD MDS9500 To new MDS9700

vincent.carlucci · ‎03-23-2021

Hello
We are replacing our old MDS9500 with new MDS9700
I would like to know if there is a simple procedure to copy the configuration from the old MDS to the New
What are the step and command to do it
thank you very much

marce1000 · ‎03-23-2021

- You can copy the running-config to an external tftp repository with :

copy system:running-config tftp://tftp-server-ip/mds9500.cfg

and the import on the new device with a reverse command.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

balaji.bandi · ‎03-23-2021

personally, i would copy show run and notepad++

change any modification required, and apply config a few lines at a time to see any errors (if the new device has new code may not work some old commands).

also, make sure do not lock yourself with the device if the device configures AAA config.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help