cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
436
Views
0
Helpful
4
Replies

Copy image to flash disk question.

mitchel
Level 1
Level 1

Hello. When I copy a new image to my flash disk on 7206, I get some 0's in the out put. I reformated and tried twice but both times I get some 0's. Does this mean the file is bad?

Thanks

Loading c7200-is-mz.121-19.E1.bin from 192.168.0.5 (via FastEthernet0/0): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!OO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!O!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 10794668/21588992 bytes]

4 Replies 4

deilert
Level 6
Level 6

o means an out of order packet , as long as it verifies ok you should be fine

verify flash

Verify flash wont work, this is a flash disk. Is there a verify or similiar command for a flash disk?

c7206#verify ?

bootflash: File to be verified

flash: File to be verified

slot0: File to be verified

slot1: File to be verified

c7206#verify disk1:c7200-is-mz.121-19.E1.bin

%Filesystem does not support verify operations

sorry I forgot it does not worjk on 7200's need to complare the image size on the disk to the image size on tftp server

Ok they match, thanks a lot.

Review Cisco Networking for a $25 gift card