Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello. When I copy a new image to my flash disk on 7206, I get some 0's in the out put. I reformated and tried twice but both times I get some 0's. Does this mean the file is bad?ThanksLoading c7200-is-mz.121-19.E1.bin from 192.168.0.5 (via FastEther...
Can some one tell me what floavor of PPP is used on a 7206 to support DSL PPPoA customers?interface ATM3/0.119 point-to-point description VT1, VPI/VCI 1/119 pvc 1/119 encapsulation aal5mux ppp Virtual-Template1interface Virtual-Template1 ip unnumb...
Hello. I am trying to log DSL customer monthly data transfer amounts. I have a RADIUS server for authentication and it sends auth and accounting data to our back end SQL database. For dial up customers this works fine as there calls end after at most...
Over the past few days I am seeing a large increase of inbound traffic on a T1 circuit. So much so that the circuit is saturated about 8 or 9 hours a day. Is there a way that I can monitor this to see where this traffic is comming from? I have a 7206...
Verify flash wont work, this is a flash disk. Is there a verify or similiar command for a flash disk?c7206#verify ? bootflash: File to be verified flash: File to be verified slot0: File to be verified slot1: File to be verif...
Thanks, I was able to come to the same conclusion. One question, with over 500 virtual interfaces active what kind of hit will this put on the router, 7206 vxr, 256kb.Thanks,M
Don, here is output from my router and the config on the Ascend MAX. A sh ip ospf neigbor shows none.I have all interfaces except fasteht set to passive. The MAX's are connected to the fasteth int via switch.c7206#sh ip ospf 201 Routing Process "ospf...
