Custom queuing configuration

[admin_2]

How would I configure custom queuing for the following?

IPX packet size 700 bytes 30%

IP packet size 1400 bytes 25%

DLSW packet size 500 bytes 45%

Is there a formula for working out custom queuing problems like the above?

[#2]

This link will answer all of your questions:

http://www.cisco.com/warp/public/784/packet/jan99/17.html

Here is the steps I took to get an answer:

IP 1400 25%

IPX 700 30%

DLSW 500 45%

IP 1

IPX 2

DLSW 2.8

IP 1 x 25% = .25

IPX 2 x 30% = .60

DLSW 2.8 x 45% = 1.26

Normalize values (based on lowest number):

IP .25/.25 = 1

IPX .60/.25 = 2.4 (approx round down to 2)

DLSW 1.26/.25=5.04 (approx round down to 5)

Our ratio of frames per queue to deliver

the correct percentages of traffic is 1:2:5 or 1400:1400:2500 bytes.

The way we come to the ratio above is as follows:

IP= 1 x 1400 = 1400

IPX= 2 x 700 = 1400

DLSW= 5 x 500 = 2500