dhcp server: text file format

[MARCELO MATURO]

I use a router as a DHCP server. Now I´m using manual binding to asing ip, nex-server, bootfile, default-router, client-name, dns-server, domain-name.

Is it possible to binding all parameters using static-mapping ( reading a text file)?. The documentation I found show the text file format for binding the ip address only:

*time* January 21 2005 03:52 PM

*version* 2

!IP address Type Hardware address Lease expiration

2.0.0.4 /24 1 0090.bff6.081e Infinite

2.0.0.5 /28 id 00b7.0813.88f1.66

3.0.0.2 /21 1 0090.bff6.081d Infinite

*end*

[wong34539]

guess, you might have to configure those parameters manualy only, static-mapping by reading from a text file is used for assignment of static IP addresses, without creating numerous host pools with manual bindings. You can refer the following link for configuring DHCP :

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuration_guide_chapter09186a00800ca6b5.html