DRAM & Flash replace

[sachinraja]

Hi.. I'm planning for an upgrade of both flash & DRAM in a 3660 router. as of now, it has 16/64. i want a 32/128 requirement. so.. i have to remove the existing 2x8 flash and 2x32 RAM and replace with a 2x16 flash & 1x128 DRAM.

since it is going to be a replacement, I will open the router and replace both flash & DRAM, and then do an xmodem to the flash to bring up the router. Am i right ? Am i missing something ?

[Georg Pauwen · Accepted solution]

Hello,

you are right. Check the following link for a detailed description of the procedure:

CISCO 3600 SERIES MULTISERVICE PLATFORMS

Upgrading System Memory in Cisco 3600 Series Routers

http://www.cisco.com/en/US/products/hw/routers/ps274/products_installation_and_configuration_guide09186a008007ce07.html

Regards,

GP

www.solutionfinders.nl

[sachinraja]

Thanks george