cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
419
Views
0
Helpful
2
Replies

drops and flushes

tom.chan
Level 1
Level 1

FastEthernet0/0 is up, line protocol is up

Hardware is i82543 (Livengood), address is 000b.452f.7408 (bia 000b.452f.7408)

.

Last clearing of "show interface" counters never

Input queue: 0/75/5775/142350 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

30 second input rate 23000 bits/sec, 31 packets/sec

30 second output rate 269000 bits/sec, 62 packets/sec

1444160094 packets input, 3757484726 bytes

Received 6942143 broadcasts, 0 runts, 0 giants, 5030 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

0 watchdog

0 input packets with dribble condition detected

1682259161 packets output, 774377895 bytes, 0 underruns

0 output errors, 0 collisions, 3 interface resets

0 babbles, 0 late collision, 0 deferred

1 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

According to one of the above lines,

Input queue: 0/75/5775/142350 (size/max/drops/flushes); Total output drops: 0

What is the major different between drops and flushes here?

Thanks,

2 Replies 2

thisisshanky
Level 11
Level 11

This link might help!

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_tech_note09186a00800ac5a8.shtml

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

blazesod
Level 1
Level 1

Hi,

Try looking up the "counters basic" command for RIP and IGRP.

Review Cisco Networking for a $25 gift card