11-19-2004 09:28 AM - edited 03-02-2019 08:05 PM
Hi,
I am facing a unique problem with EIGRP.
I am running IOS 12.3.9b in cisco 7200 router. This router acts as a aggregation routers.
On this router, when I check routing table, I am getting a EIGRP redistributed route for the directly connected network.
Eg.
D EX 192.168.1.1/32
This perticular route I am getting from the other end router. There is no redistribution configured in EIGRP on all these routers. Also there is no other dynamic routing protocols other than EIGRP.
Can anyone throw some tip on how to resolve this problem.
Regards,
Seetharaman.
11-19-2004 10:46 AM
Sounds like a bug to me. Have you tried another IOS?
11-19-2004 06:58 PM
Yes, I tried upgrading the IOS to 12.3.9b.
Earlier I was getting this route only for 3 interface.
After the upgrade I am getting in all the directly connected serial interface.
Regards,
Seetharaman.
11-19-2004 12:40 PM
Is the route you posted a host route to a PPP connection?
Daniel
11-19-2004 06:28 PM
try configuring "no peer neighbor-route" under the serial interface.
Hope this helps,
11-19-2004 07:02 PM
Hi,
Thanks for the tip. I will try and revert back.
What could be the problem?
Regards,
Seetharaman.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide