ESR6300 Interface Naming Convention

[TBeasley]

I am looking at building a PCB to install an ESR6300. I see it has 6 GigE interfaces (2 route / 4 switch). I am trying to find a supporting document to discover if the default naming is G0/0-G0/5 or something else. I assume G0/0-G0/5, but I want to verify prior to proceeding with my project.

Thanks!

[pman · Accepted solution]

Hi,

I have attached a link on the subject.

It has all the information you need

https://www.cisco.com/c/en/us/td/docs/routers/embedded/6300/hardware/tech-guide/ESR6300-tech-guide.html#pgfId-219713

https://www.cisco.com/c/en/us/td/docs/routers/embedded/6300/hardware/tech-guide/ESR6300-tech-guide.html