03-21-2003 01:29 AM - edited 03-02-2019 06:02 AM
Hello,
if i try to Import a 2950 into RME Inventory i get the Message "not Responding.
I checked community Strings and telnet Passwords.
The Software Release on the 2950 is: IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1).
An Import of our other 2950 is ok.
Is there a known Problem with the IOS Release?
What am i doing wrong?
Any Help is welcome
Regards
Thomas
03-22-2003 04:07 PM
Select show details for the above device to see what is the reason for not responding shown by RME.
03-23-2003 11:30 PM
Hello,
My Jet Trace looks like:
Source: xxx.xxx.xxx.xxx Destination: yyy.yyy.yyy.yyy Protocol: NBNS Info: Name query NBSTAT *<00><00><00><00>........
Source: yyy.yyy.yyy.yyy Detsination: xxx.xxx.xxx.xxx Protocol: ICMP Info: Destination unreachable.
Testing this Component with CW RME Connectivity Test, results in
UDP: failed
TCP: failed
HTTP: okay
TFTP: failed
Telnet: okay
SNMPR: okay
SNMPW: okay
Any Ideas ?
Regards
Thomas
03-24-2003 09:28 PM
hello
I got the same problem when i try to Import a 2950 into RME Inventory.
I recommend you to modify RME system configuration.
(Fast Snmp Timeout,Fast Snmp retry,Slow Snmp timeout ,and Slow Snmp retry)
Regards
Matt
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide