02-08-2006 01:48 AM - edited 03-03-2019 01:44 AM
Hi
I have 2 cisco 2621 series routers to be configured in bridge mode.
i'll be connecting this 2 routers using serial connection 128 lease line.
the problem is im not sure how to configure this 2 routers in bridge mode.
as far as i know, i need to issue the command no ip routing.
is there anything else i need to do?
can anyone guide me on how to configure
the router in bridge mode? is there any support page for this is cisco website?
thanks
Jega
Solved! Go to Solution.
02-08-2006 01:58 AM
Please check the link to the configuration guide below. It describes how to configure transparent bridging.
Regards,
Leo
02-08-2006 01:58 AM
Please check the link to the configuration guide below. It describes how to configure transparent bridging.
Regards,
Leo
02-08-2006 05:48 PM
Hi Friend
Thank you so much for your immediate reply.
I managed to find some clear guide on configuring routers in bridge mode. really appreciate your help
your solution did helped me.
Regards
Jega
11-05-2018 01:36 AM
Hi
Now link that you post not available
Could you please tell me the key word for search this ?
06-11-2020 10:05 PM
Page not available
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide