IMA IOS?

[jdepies]

Hello,

I am about to implement for the first time, IMA for our internet access.

My question is, which IOS type do I need to install to get the IMA/ATM commands? They do not seem to exist on the IP/PLUS IOS.

Thanks a lot

Jeff

[deilert]

Check the compatability matrix

http://www.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi

[jdepies]

Thanks for the link.

It says my 12.3(1a) install should work. How come I do not have the ATM option when I try and configure the interfaces? See below:

System image file is "flash:c2600-i-mz.123-1a.bin"

ROUTER(config)#int ?

Async Async interface

BVI Bridge-Group Virtual Interface

CTunnel CTunnel interface

Dialer Dialer interface

FastEthernet FastEthernet IEEE 802.3

Group-Async Async Group interface

Loopback Loopback interface

MFR Multilink Frame Relay bundle interface

Multilink Multilink-group interface

Null Null interface

Serial Serial

Tunnel Tunnel interface

Vif PGM Multicast Host interface

Virtual-Template Virtual Template interface

Virtual-TokenRing Virtual TokenRing

range interface range command

I do not have the module installed yet, is that the reason?

Thanks

Jeff

[deilert]

looking at the compatability matrix the minimum feature set you can run ima on is ip plus , the image you are currently on is ip only

[chuck.price]

I'm running IMA on Cisco IOS 12.3-1 with the IP Plus feature set.