info in interface brief

[spremkumar]

hi

it may be simple but why its showing manual,NVRAM,TFTP for different interfaces ??

FastEthernet2/0 YES manual up up

FastEthernet2/1 unassigned YES NVRAM administratively down down

Virtual-Access1 unassigned YES TFTP down down

regds

prem

[bbranch]

This defines the method by which the interface was configured, manual indicates that someone has entered config mode and configured the interface, NVRAM indicates that the interface was configured from memory (usually when the router was reloaded) and TFTP indicates that the config for the interface was TFTP'd into the router.

[spremkumar]

Hi

I made this int manually down then y its showing TFTP ,it shuld show manual .pls clear this point..

Serial4/0 unassigned YES TFTP administratively down down

Regds

prem