10-14-2003 05:48 AM - edited 03-02-2019 11:00 AM
I am looking for information on Interface Descriptor Blocks relative to how they relate to memory allocation. Specifically, why it is a good practice to reboot a router should a significant number of sub-interfaces be deleted via the "no interface" command.
Solved! Go to Solution.
10-14-2003 06:23 AM
This limit is hardware platform dependent. Check the web-site below for the actual limits based on platform and IOS release.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080094322.shtml
Hope this helps
Steve
10-14-2003 06:23 AM
This limit is hardware platform dependent. Check the web-site below for the actual limits based on platform and IOS release.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_tech_note09186a0080094322.shtml
Hope this helps
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide