02-23-2010 09:35 AM - edited 03-03-2019 05:52 AM
Is there a DETAILED packet processing flow chart for IOS (specially the ISR platform)?
Something like;
packet comes to input interface -->
decision branches (depending on processing modes, route, inspection processes, session, policy lookup, nat, buffering, etc) -->
packet goes out output interface--->
Solved! Go to Solution.
02-24-2010 02:48 PM
Hi Oscar,
This is general process order for all IOS software based router; ISR is in that category. For routers like 7600s, ASRs and Catalyst switches, they might not follow same order, because those are hardware based devices. Totally different animal.
HTH,
Lei Tian
02-23-2010 11:10 AM
02-23-2010 03:23 PM
Hi Lei Tian,
and thank you for the prompt, and very informational response.
I definately will put this book on my safari shelf. With that in mind, Are there any publications like this for the ISR platform? also detailing other features like voip? or would you say that this pretty much the general architecture for IOS and would be platform independent?
thank you much,
-Oscar
02-24-2010 02:48 PM
Hi Oscar,
This is general process order for all IOS software based router; ISR is in that category. For routers like 7600s, ASRs and Catalyst switches, they might not follow same order, because those are hardware based devices. Totally different animal.
HTH,
Lei Tian
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide