cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
256
Views
0
Helpful
1
Replies

IOS problem with router 3660

sramki
Level 1
Level 1

Hello to all,

I am facing this problem with router 3660.Firstly It has 32 MB Flash 256 DRAM.I upgraded It WITH IOS ver. 12.2.and it is coming on rommon mode Than i tried X-modem but it is also not working.In XMODEM i used a fresh IOS image but still it is in ROMMON mode.

so please help me

Thanks,

Priyanka

System Bootstrap, Version 12.2(2)XA4, RELEASE SOFTWARE (fc1)

Copyright (c) 1999 by cisco Systems, Inc.

TAC:Home:SW:IOS:Specials for info

C2600 platform with 65536 Kbytes of main memory

get_man_dev: Unknown device - probably NOT formatted.

unknown flash device - mandev code = 0xffff

cannot read flash info

getdevnum warning: device "flash" has size of zero

get_man_dev: Unknown device - probably NOT formatted.

unknown flash device - mandev code = 0xffff

cannot read flash info

getdevnum warning: device "flash" has size of zero

open: read error...requested 0x4 bytes, got 0x0

trouble reading device magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

1 Reply 1

Hello,

I think your flash needs to be formatted, use the following command:

rommon>format flash:

You then have to load an IOS onto the flash with the Xmodem procedure you mentioned earlier.

Regards,

GP

Review Cisco Networking for a $25 gift card