IPV6 on Cisco 3620 Router

[atuldalvi]

Dear Sir,

I have a Cisco 3620 Router with 32 mb Dram and 16 MB flash.

Which IOS will support IPV6 addressing on this Router.

Thanks/Regard

Atul

[Georg Pauwen]

Hello Atul,

according to the software advisor, you need at least IP Plus IOS 12.2(15)T16, the image name is c3620-is-mz.12.2-15.T16.

This image requires 64MB of DRAM and 16MB of flash, so you will need to add DRAM.

Regards,

GP

[atuldalvi]

Dear GP,

Do you know any source from where i can get ios c3620-is-mz.12.2-15.T16 ??

Regards

Atul

[Georg Pauwen]

Hello Atul,

the only way to get the IOS is to download it from CCO, or to get it from a reseller or partner.

Here is the link to the CCO download file:

c3620-is-mz.122-15.T16.bin

http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosresult.cgi?get_crypto=&data_from=&hardware_name=3620&software_name=IP%20PLUS&release_name=12.2.15T16&majorRel=12.2&state=:HW:RL:SW&type=Early%20Deployment

Obviously, your access level needs to be sufficient to download the IOS...

HTH,

GP