09-18-2003 07:34 PM - edited 03-02-2019 10:27 AM
I have the following message dispalyed when i type show isdn status.
Global ISDN Switchtype = basic-net3
ISDN BRI0 interface
dsl 0, interface ISDN Switchtype = basic-net3
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 23, Ces = 1, SAPI = 21, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
TEI = 37, Ces = 1, SAPI = 23, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 1, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 27, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 36, State = TEI_ASSIGNED
TEI = 52, Ces = 1, SAPI = 31, State = TEI_ASSIGNED
TEI = 34, Ces = 1, SAPI = 43, State = TEI_ASSIGNED
TEI = 50, Ces = 1, SAPI = 30, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 57, State = TEI_ASSIGNED
TEI = 55, Ces = 1, SAPI = 27, State = TEI_ASSIGNED
TEI = 0, Ces = 1, SAPI = 40, State = TEI_ASSIGNED
TEI = 55, Ces = 1, SAPI = 13, State = TEI_ASSIGNED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x80000003
Total Allocated ISDN CCBs = 0
Can any one tell me why it is displaying multiple TEI assigned.The ISDN is connected to the BRI port of the router only and no other device.
09-18-2003 09:58 PM
Definitely looks weird, but does a clearing of BRI interface (clear int bri 0) or (shut/no shut) of BRI interface, clear this problem ?
09-18-2003 11:05 PM
The shutting or clearing the interface does not help.but if you reboot the router, it gets cleared.which then again builds up with time.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide