12-09-2001 06:09 PM - edited 03-01-2019 07:40 PM
I have a Cisco 1760router. And it only has 1 ethernet, 1 isdn wan interface. Does anyone know any convertor or anything that I could convert the isdn interface to a serial interface. Or any way that I can connect a modem into the Isdn interface to dial out.
12-17-2001 06:41 AM
You should be able to sell your 1760 or maybe your distributor will allow a trade-in towards another model. There are no adapters available that Im aware of. You might consider a modular router (i.e. 2600 series) next time so you can just swap out interface cards as your needs change.
12-17-2001 08:26 AM
According to the Datasheet from Cisco you can add 1 more WAN Interface card into the empty WIC slot available. I would suggest getting an additional serial WAN interface card. There are 2 to choose from. THe WIC-1T and WIC-2T. One with 1 serial port, the other with 2 serial ports.
So far I don't think there are converters available to convert from ISDN to serial. The technology does not allow it.
Hope this helps.
Regards,
Ron
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide