%KERNEL-1-CREATEPROCESSFAILED message on 2980

[Georg Pauwen]

Hello colleagues,

I am getting the error message below on one of my Cisco 2980 switches. Does anybody have an idea what can cause this ? I am running CatOS 7.2(2).

2006 Aug 15 16:38:16 CET-Zomertijd +02:00 %KERNEL-1-CREATEPROCESSFAILED:Error in

creating process: Unavailable free stack; stack type: 2; Name: tnetproc

I was unable to find anything on that process (tnetproc) on CCO or Google...:(

Thanks for your help in advance.

Regards,

GP

[m.sir]

According Error Message Decoder

http://www.cisco.com/cgi-bin/Support/Errordecoder/index.cgi

1. %KERNEL-1-CREATEPROCESSFAILED: Error in creating process: [chars]; stack type: [dec]; Name: [chars]

This message indicates that the create process has failed; the system is out of processes. The Catalyst operating system allows a limited number of processes based on the number of stacks available. When stacks are unavailable, this message is generated. The first [chars] is the process ID, the [dec] is the stack type, and the second [chars] is the process name.

Recommended Action: Contact your technical support representative.

Related documents- No specific documents apply to this error message.

M.

Hope that helps rate if it does

[Georg Pauwen]

Hello,

thanks for your reply. Do you know if, and how, I can increase the number of stacks available for processes ?

Regards,

GP