Wanted to ensure out network is behaving properly now that its 100% fault tolerant. However, during some across the LAN speed tests, it seems slow to me.
Entire backbone is 1gig, servers are all load balanced with two nic's to the core (3750G's) My client is connected gig as well.
netcps shows results:
C:\>netcps xx.xx.xx.xx
NetCPS 1.0 - Entering client mode. Press ^C to quit
Connecting to 1xx.xx.xx.xx port 4455... Connected!
---> CPS 8485888.00 KPS: 8287.00 MPS: 8.09
Avrg CPS 8570298.00 KPS: 8369.43 MPS: 8.17
Peek CPS 9139200.00 KPS: 8925.00 MPS: 8.72
Done. 104857600 Kb transferred in 12.24 seconds.
QCheck shows:
170.213 Mbps (with 100meg client to 1000meg server its about 91Mbps)
Is there a better program/test to do to ensure everything is routing and performing the way it should be?