06-30-2005 09:39 AM - edited 03-02-2019 11:15 PM
Folks,
Could someone please tell me why my layer 3 interfaces (vlan interfaces) are down??version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
service counters max age 10
!
hostname Chicago
!
enable password cisco
!
no aaa new-model
ip subnet-zero
!
!
no ip domain-lookup
!
ip vrf vlan40-10
rd 40:10
route-target export 40:10
route-target import 40:10
--More-- !
ip vrf vlan50-20
rd 50:20
route-target export 50:20
route-target import 50:20
!
ip vrf vlan60-30
rd 60:30
route-target export 60:30
route-target import 60:30
!
mls ip multicast flow-stat-timer 9
no mls flow ip
no mls flow ipv6
mls cef error action freeze
!
!
!
!
!
!
!
!
--More-- !
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
diagnostic cns publish cisco.cns.device.diag_results
diagnostic cns subscribe cisco.cns.device.diag_commands
!
redundancy
mode sso
main-cpu
auto-sync running-config
!
vlan internal allocation policy ascending
vlan access-log ratelimit 2000
!
!
interface Loopback0
ip address 1.1.1.1 255.255.255.0
ip router isis
!
interface GigabitEthernet6/1
no ip address
shutdown
!
--More-- interface GigabitEthernet6/2
no ip address
shutdown
!
interface GigabitEthernet7/1
no ip address
shutdown
!
interface GigabitEthernet7/2
ip address 100.100.100.1 255.255.255.0
ip router isis
tag-switching ip
!
interface Vlan1
no ip address
!
interface Vlan40
ip vrf forwarding vlan40-10
ip address 40.40.40.1 255.255.255.0
!
interface Vlan50
ip vrf forwarding vlan50-20
ip address 50.50.50.1 255.255.255.0
!
interface Vlan60
ip address 60.60.60.1 255.255.255.0
!
router eigrp 100
network 40.0.0.0
network 50.0.0.0
network 60.0.0.0
no auto-summary
!
router isis
net 10.0010.0000.0002.00
!
--More-- router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 2.2.2.2 remote-as 100
neighbor 2.2.2.2 update-source Loopback0
no auto-summary
!
address-family vpnv4
neighbor 2.2.2.2 activate
neighbor 2.2.2.2 send-community both
exit-address-family
!
address-family ipv4 vrf vlan60-30
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf vlan50-20
no auto-summary
no synchronization
exit-address-family
!
address-family ipv4 vrf vlan40-10
--More-- redistribute connected metric 100 route-map vlan40-10
no auto-summary
no synchronization
exit-address-family
!
ip classless
no ip http server
!
!
!
!
route-map vlan40-10 permit 1
match interface Vlan40
!
!
!
control-plane
!
!
!
dial-peer cor custom
!
!
--More-- !
!
line con 0
line vty 0 4
password cisco
login
!
end
06-30-2005 09:42 AM
Do you have any devices in those VLANs? If not, due to auto-state feature, the L3 VLAN interfaces will be down.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide