I have a t1 w/ which I'd like to split up the bandwidth fairly.
If the following is setup
access-list 101 permit ip any 192.168.0.0 0.0.0.7
class-map match-any limit_speed
match access-group 101
policy-map speed
class limit
shape peak 256
Will this limit the entire subnet of 192.168.0.0/29 to only 256k of shared peak bandwidth OR limit each individual ip in that range to 256k?
One way I'm wasting 85% of my bandwith - the other I'm evening things out properly..
If the above doesn't accomplish division of the t1 would changing the acl to
access-list 101 permit ip any host 192.168.0.1
access-list 101 permit ip any host 192.168.0.2
access-list 101 permit ip any host 192.168.0.3
access-list 101 permit ip any host 192.168.0.4
access-list 101 permit ip any host 192.168.0.5
access-list 101 permit ip any host 192.168.0.6
Do so?