08-17-2001 02:52 AM - edited 03-01-2019 06:45 PM
I have a LD 416 with Sw version 4.1.1 and I found that the NFS protocol doesn't work when installing the LocalDirector between two servers.
I found the bug number CSCdt05312, but I can't find the solution for this problem wich is similar to mine (I hope).
Thanks in advance,
Roberto
08-17-2001 03:19 AM
In theory, if you are using the LDIR as a bridging
device, it should work, e.g.
NFS Client - Interface 0 LDIR Interface 1 - NFS SRV
and you have 'no secure 0' and 'no secure 1'
If this is your setup and it still does not work,
my only suggestion is either trying LDIR 4.2.2 or
open a TAC case.
If this is not your setup, are you then using the
LDIR to load balance the NFS Clients to multiple
NFS servers?
/Johnny
08-17-2001 03:47 AM
I'm using the LDir as a bridging and all other services are working fine.
08-29-2001 10:09 PM
Johny is correct! LDIR should bridge anything that is not destined to the vip unless the secure is enabled. If secure is enabled the only traffic that will pass through the LDIR is the traffic destined for it. I would recommend you open up a case with the TAC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide