cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
895
Views
5
Helpful
6
Replies

Native VLAN on switchport trunk

rayle_alive
Level 1
Level 1

Is i possible to set more than ONE native vlan on a switchport trunk.

Thanks

6 Replies 6

ankbhasi
Cisco Employee
Cisco Employee

Hi Rayle,

Nops thats not possible. Only one native vlan can be configured on one trunk interface.

HTH

Ankur

* Pls rate helpfull post.

chris.baird
Level 1
Level 1

Also, you can only have one native VLAN per switch.

I believe you can have multiple native VLAN's per switch. One per trunk port; meaning each trunk port can have a different native VLAN configured. I do this all the time on the Cat 6500.

Hi there,

Just to clarify, the native vlan is set in the trunk configuration. This means that you can set this per trunk.

You can only have 1 per trunk. If you had more than 1, which one would it send it to??

Hope that clarifys,

LH

Please rate all posts

What command do you use? Thanks.

For IOS switches

switchport trunk native vlan

For CatOS

set vlan Mod/port where mod port is the trunk port

HTH, rate if it does

Narayan

Review Cisco Networking for a $25 gift card