Please find run conf from R3, R5 & R6.in the end i have pasted sh ip osp int
R3
!
interface Loopback1000
ip address 3.3.3.3 255.255.255.0
ip ospf network point-to-point
!
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.1 multipoint
ip address 10.12.3.3 255.255.255.0
ip ospf priority 0
frame-relay map ip 10.12.3.1 301 broadcast
frame-relay map ip 10.12.3.2 301 broadcast
!
interface Serial1/1
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/1.1 multipoint
ip address 10.35.6.1 255.255.255.0
ip ospf network point-to-multipoint
frame-relay map ip 10.35.6.2 305
frame-relay map ip 10.35.6.3 306
!
!
router ospf 1
router-id 3.3.3.3
log-adjacency-changes
network 3.3.3.3 0.0.0.0 area 0
network 10.12.3.0 0.0.0.255 area 0
network 10.35.6.1 0.0.0.0 area 356
!
R5
interface Loopback1000
ip address 5.5.5.5 255.255.255.0
ip ospf network point-to-point
!
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.1 point-to-point
ip address 10.35.6.2 255.255.255.0
ip ospf hello-interval 30
frame-relay interface-dlci 503
!
router ospf 1
router-id 5.5.5.5
log-adjacency-changes
network 5.5.5.5 0.0.0.0 area 356
network 10.35.6.2 0.0.0.0 area 356
!
R6
!
interface Loopback1000
ip address 6.6.6.6 255.255.255.0
ip ospf network point-to-point
!
interface Serial1/0
no ip address
encapsulation frame-relay
serial restart-delay 0
!
interface Serial1/0.1 point-to-point
ip address 10.35.6.3 255.255.255.0
ip ospf network point-to-multipoint
ip ospf hello-interval 10
frame-relay interface-dlci 603
!
!
router ospf 1
router-id 6.6.6.6
log-adjacency-changes
network 6.6.6.6 0.0.0.0 area 356
network 10.35.6.0 0.0.0.255 area 356
!
****************************
R3#sh ip osp int
Serial1/0.1 is up, line protocol is up
Internet Address 10.12.3.3/24, Area 0
Process ID 1, Router ID 3.3.3.3, Network Type NON_BROADCAST, Cost: 64
Transmit Delay is 1 sec, State DROTHER, Priority 0
Designated Router (ID) 1.1.1.1, Interface address 10.12.3.1
No backup designated router on this network
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:29
Supports Link-local Signaling (LLS)
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 1.1.1.1 (Designated Router)
Suppress hello for 0 neighbor(s)
Loopback1000 is up, line protocol is up
Internet Address 3.3.3.3/24, Area 0
Process ID 1, Router ID 3.3.3.3, Network Type POINT_TO_POINT, Cost: 1
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Serial1/1.1 is up, line protocol is up
Internet Address 10.35.6.1/24, Area 356
Process ID 1, Router ID 3.3.3.3, Network Type POINT_TO_MULTIPOINT, Cost: 64
Transmit Delay is 1 sec, State POINT_TO_MULTIPOINT,
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:00
Supports Link-local Signaling (LLS)
Index 1/3, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 3
Last flood scan time is 0 msec, maximum is 4 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 5.5.5.5
Suppress hello for 0 neighbor(s)
*******************************
R5#sh ip osp int
Serial1/0.1 is up, line protocol is up
Internet Address 10.35.6.2/24, Area 356
Process ID 1, Router ID 5.5.5.5, Network Type POINT_TO_POINT, Cost: 64
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 30, Dead 120, Wait 120, Retransmit 5
oob-resync timeout 120
Hello due in 00:00:25
Supports Link-local Signaling (LLS)
Index 2/2, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 1, maximum is 1
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 1, Adjacent neighbor count is 1
Adjacent with neighbor 3.3.3.3
Suppress hello for 0 neighbor(s)
Loopback1000 is up, line protocol is up
Internet Address 5.5.5.5/24, Area 356
Process ID 1, Router ID 5.5.5.5, Network Type POINT_TO_POINT, Cost: 1
Transmit Delay is 1 sec, State POINT_TO_POINT,
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
oob-resync timeout 40
Supports Link-local Signaling (LLS)
Index 1/1, flood queue length 0
Next 0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 0 msec, maximum is 0 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)
Regards,
irfan
